Atmizoo - "DotShell MTL Air Flow Pins Kit" sold separately here
Features and Specs
- Air flow tuning via an AFCS Ring adjusting from zero to either D=3.8mm (stock Pos Tube) or D=2.0mm (spare Pos. Tube). Fine tuning with accessory MTL pins kit D=1.0/1.2/1.5mm
- M2.5mm pan head phillips post screws.
- 12.2mm post-to-post length, ~8.5mm post-to-post net space , ~8.0mm coil space.
- Max. net coiling height in the chamber 4.2mm
- Chimney top inner D ~4.0mm
- Height ~35mm [AFC section attached, Rebuild Base excl.] / Weight ~25g [AFCS section attached, Rebuild Base excl.]
DotShell takes the basic concept of the VapeShell and elaborates, incorporating also some elements out of dotAIO stock components. The design utilizes the top part of dotAIO’s stock reservoir, incorporates an adaptation of dotAIO RBA’s AFC system, but also offers a surprisingly large deck with real time access potential and further customisable air flow under coil. The deck is able to host many different approaches of one-coil rebuilding, from simple round wire to large exotic coils, still retaining high tank capacity (a bit higher from Dotmod’s RBA version). The air flow is adjusted by an AFC base section with high accuracy which dials in the air hole under coil from zero to either D=3.8mm (stock Pos Tube) or D=2.0mm (spare Pos. Tube). There is an MTL set of pins further available as an accessory, which, as with the VapeShell, further customises the air flow for proper true MTL setups. This makes the DothSell versatile and perfect for a wide range of vaping profiles, from MTL to DTL. Add to the above Dotmod's auxilary 510 base for testing, rebuilding, dry-burning or other purposes and you have the whole package. You can’t get wrong with the DotShell: Its features and potential bring the already succesful dotAIO to a totally different level.
Finished in a Midnight Black coloured electroplated finish. SS316 electroplated metal parts, coloured in a chromatic black mixture from dark blue - black, purple, and other dark colour shades. Plated components are the Chimney, the Negative Post (Deck), the Positive Post, and the AFC Ring, while the rest of the components have a natural CNC look.
Please Note: Due to the nature of electroplating, it is expected to find small marks and iridescent effect on certain points of component INNER surfaces. Steps of the procedure ensure that outer surfaces of the components have uniform look and finish, but inner surfaces can not be processed as effectively equally.
Electroplating is not a coating. Rather, it is a very thin metal layer added on top. As such, hair-like scratches and small bumps, typical on metal surfaces, should be expected on all plated surfaces, visible from close distance or with the use of a magnifying lens.
As an electroplating attribute, tonic differences are expected in the same colour between batches. Differences are not visible with bare eyes in the case of Midnight Black and Gold, and appear to be more intense with the Iron Grey finish. For this, Atmizoo keeps stock of parts from different batches separately, in order to ensure that replacements will come from the same batch with the device when they are needed.
To the extent allowed by law, e-cigarettes.ca Inc. is not liable for any incidental or consequential damages that result from the use of, or the inability to use, the materials on this website. e-cigarettes.ca Inc. will not be held liable for any personal and/or property damage, illness, injury or financial loss caused by the use of the products, or inability to use the products purchased from e-cigarettes.ca Inc.